On air-cooled engines, the oil strainer, located behind the crankcase cover, must be checked at every oil change and cleaned.
Normally, you can't reuse the gaskets, but it's completely different with these silicone gaskets. They are reusable, only the copper rings need to be replaced at each oil change.
The use of a liquid seal is not necessary with these gaskets, and due to the choice of material, they are much tighter than the paper version. If you want the sump plate to be really tight, using this kit is the best choice.
The kit consists of two silicone gaskets, high quality all-copper washers and a sealing ring for the drain plug (if you don't have a drain plug, this ring will not be used).
Useful information from Paruzzi magazine and from our YouTube channel :
Look for more technical articles on the page Paruzzi Magazine